Tools
Phillips Screwdriver
*1
Microfiber Cloth
*1
Make sure to unplug the tower fan before cleaning. Safety is always the first priority.
First, remove the screw on the upper side of the back. Rotate the screwdriver in the counter-clockwise direction. Then pull out the grille through the handle and take the grille away.
Clean and impeller with a vacuum. The impeller of the tower fan could be stuck by the dust. Removing the dust will keep your fan powerful and efficient. Then wash the grille and make sure to dry it thoroughly before reassembling.
Insert the grille into the holes as shown. Then lock it to the back. Finally put the screw back into the hole on the upper side at the back in clockwise direction.
Was this article helpful?
Not Helpful
Helpful