Tools
Phillips Screwdriver
*1
Microfiber Cloth
*1
Make sure to unplug the air circulator fan before cleaning. Safety is always the first priority.
Tilt the fan head upward 90°. Then remove the screw on the front grille. Please keep the screw with care.
Rotate the front grille counterclockwise to align the right point. Then take off the grille vertically from the fan blades.
Hold the blades with one hand. Then remove the blade cap clockwise and take the blades assembly out of the shaft. After removing them, you can wipe clean the rear grille.
Wash the front grille, blades, and blade cap. Make sure to dry them with a dry cloth before reassembling.
Insert the blades onto the shaft and tighten the blade cap counterclockwise. Then install the front grille.
Rotate the grille in the clockwise direction and align the point on the front grille with the left point on the casing. Finally, install the screw back in place.
Was this article helpful?
Not Helpful
Helpful