Make sure the dehumidifier is powered off and unplugged before cleaning. Safety is always the priority.
Take the water bucket out from the bottom of the appliance. Pour water out of the bucket until it is empty.
Rotate the handle until it aligns with the notch. Press down on the locking tab, then gently pull one side of the handle outward to remove it.
Press the tabs as shown in the image. Gradually take the top cover off. Then, detach the top cover from the lock to completely remove it.
Rinse the handle and the water bucket lid thoroughly under running water. Then rinse the water bucket and the float as well.
Attention: DO NOT take the foam out of the foat.
Align the cutouts on the top cover with the sockets on the water bucket. Also, match the side latches with the slots.
Align the handle with the notch on the locking tab and press it firmly inward to re-attach it to the top cover.
Press down on the top cover to secure it to the water bucket. Make sure all tabs are properly aligned and locked into place.
Insert the water bucket back in place, and the appliance is now ready for normal operation.
Was this article helpful?
Not Helpful
Helpful