Tools
Water Container
*1
When the water bucket is full, the Water Level indicator will light up, and the unit will stop operating until the water bucket is emptied and put back in place.
Turn off the dehumidifier. Then, carefully rotate the unit to access the back panel.
Rotate counterclockwise to remove the drain outlet cap.
Note: Slight water may spill out. Prepare a small container to catch the water when removing the cap.
Retrieve the hose adaptor that was removed from the water tank cover during unpacking. Then, screw the hose adapter into the outlet clockwise.
Plug the drain hose onto the adapter and connect the other end to a floor drain.
Make sure to straighten any kink or knot on the hose.
Note: The floor drain must not be in a position that is higher than the drain outlet on the dehumidifier. This appliance supports standard garden hose (GHT) with a thread size of 25.4mm(not included).
Was this article helpful?
Not Helpful
Helpful