Before assembling the base, please ensure you have all the components shown in the picture.
Caution: Do not plug in and use the tower fan before it is completely assembled.
Keep the base halves in a crossed position. Match the arched cut-out on one half with the arched support on the other half. Then hook them together.
Press down on the edges to securely snap the two base halves together until you hear a click.
Turn the fan body of the tower fan upside down. Then place it onto the foam of the package.
Thread the cord through the center hole of the base.
Fit the base onto the bottom of the tower fan by aligning the locating pins on the bottom with the holes on the base.
Rotate the base clockwise until you hear a click. That means the base is locked in place.
Note: It's normal for the base to rotate together with the fan body. In this case, keep rotating until the base is locked.
Thread the cord through all the rear cord keepers.
Caution: Please ensure the cord is placed behind the tower fan.
Put the tower fan upright. The assembly is now complete, and the tower fan is ready for use.
Was this article helpful?
Not Helpful
Helpful