Tools
Phillips Screwdriver
*1
Microfiber Cloth
*1
Make sure to unplug the tower fan before cleaning. Safety is always the priority.
Remove the screw at the bottom of the rear grille with a Philips screwdriver in the counterclockwise direction. Then pull down the grille.
Pull out the rear grille and take it out.
Remove the screw at the bottom of the impeller in the counterclockwise direction. Please keep the screw with care.
Lift the impeller and tilt it in a certain angle. Then pull out the impeller and wipe the interior of the tower fan.
Rinse the rear grille and the impeller. Make sure they are completely dry before reassembling.
Insert the impeller to the top of the tower fan. Then align the screw holes of the impeller and the axis at the bottom as shown. Install the screw back in the clockwise direction.
Insert the grille into the holes as shown and lift it up. Finally, install the screw back in the clockwise direction. Now, the tower fan is ready for use.
Was this article helpful?
Not Helpful
Helpful